| The SURE 100 is the largest and latest
model of the RCS Surepowr Series Spring Return Electric Actuators. This
newly-developed product incorporates the most advanced high-tech research
and design, yet it uses a simple concept-a torsion power spring which provides
dependable mechanical force for actuation when electrical power is lost.
The Sure 100 torque capability is ideally suited for industrial-grade dampers
and rotary valves when emergency shutdown is required.
This model is available in two speeds for
two position (open/close) control as well as modulating control service.
The Sure 100 enclosure complies with NEMA 4, 7 and 9 requirements and is
available with either
clockwise or counterclockwise power spring
drive. CSA certification is in progress. |
Applications
 |
Safety
shutdown for automated and computer-controlled systems |
|
Used
where emergency shutdown is required in critical valve applications, such
as 6” and 8” butterfly valves, 2” and 3” ball and/or plug valves |
 |
Process
control systems, all types |
|
Vapor
recovery systems |
|
Tank
truck loading stations |
|
For
fast and accurate closure of dampers in air systems that require reliable
emergency operation |
|
Vehicle
tunnel and subway station smoke exhaust systems |
|
Power
plant coal dust collecting systems |
|
Air
intake and exhaust ventilation systems for electric utilities |
|
Isolation
dampers for air handling systems in energy plants |
|
Dryer
systems |
Features
|
Powered
by a rugged, high-torque, integral, 115 Vac or 220 Vac 50/60 Hz, Single
phase, reversible motor |
|
Precision-cut
gears and shafts are heat-treated high alloy steel |
Advantages
|
More
compact. Lighter than other fail -safe electric actuators |
|
No
messy leaks from hydraulic fluids |
|
Power
drive is electric or mechanical |
|
Easy,
low cost installations |
|
Connects
to standard 2-wire, 115 Vac, 50/60 Hz, 1Ph power line |
|
No
air or hydraulic lines required |
|
Low
maintenance and energy costs |
|
Gear
train is permanently lubricated at the factory for the life of the actuator |
|
Brake
gap is set at the factory. No adjustment is required. |
|
No
pumps, compressors or troublesome hoses and tubing |
|
Requires
less electrical power than pneumatic and hydraulic systems |
|
No
scheduled maintenance required as with some battery packs |
|
No
speed or power loss due to cold temperatures which affect fluid and battery
power |
|
Combination
NEMA 4, 6, 7 & 9 housing |
|
Water
tight/weather-proof seal makes enclosure suitable for NEMA 4 Indoor/outdoor
installations |
|
Can
be used in explosion-proof applications where battery packs could be hazardous |
|
certified device |
Optional
Features
|
Integral
potentiometer; 1,000 OHM, 2 watts, 1% linearity. Other resistances available |
|
Auxiliary
function switches |
|
Heaters
with thermostats, breathers and drains, special corrosion-resistant coatings |
|
Modulating
service for 30 second speed at 50% duty cycle |
|
Remote
position feedback available as analog or resistance signals |
|
High
temperature modification for special applications |
Specifications
|
SERIES
SURE 100
Electripowr™
Type
SR
1200
Inch Pound Torque Output
|
High
visibility position indicator |
|
Designed
for intermittent and modulating service as typified by applications which
require emergency operation to a pre-determined position |
|
Unique
micro-adjustment plates permit fast, accurate setting of travel limit switches
when needed. Switch activation cams are independently adjustable throughout
the actuator’s 90° rotation for maximum setting flexibility and accuracy. |
|
Built-in
motor overload protection |
|
Permanent
high grade lubrication |
|
Gear
train designed to withstand stall torque |
|
Operates
in any attitude or position |
|
Accessible,
clearly-marked integral terminal strip assures fast, easy field wiring |
|
Two
¾” NPT conduit entries |
|
Adjustable
end-of-travel stops |
|
ISO
5211 mounting dimensions |
|
?
Electroless nickel plated output configurations provide maximum corrosion
protection |
SURE 100 actuator
in typical butterfly valve application.
SURE 100 ACTUATOR
Output Torque
POSITION (DEGREES) |
Voltage: 115 Vac or
220 Vac, 50/60 Hz, Ph-standard
Duty Cycle: 25% for
10 second unit 50% for 30 second unit
Enclosure: Meets
all of the following in a single enclosure:Meets all of the following in
a single enclosure:
Type 4, water tight indoor
and outdoor locations;
Type 6, temporary submersion;
Type 7, explosion-proof,
Class I, Groups C&D hazardous locations;
Type 9, dust ignition proof,
Class II, Groups E,F&G, hazardous locations.
Ambient Temperature:
-40°F to + 150°F. Optional heaters are recommended below 32°F
ambient or in outdoor installations.
Limit Switches: 15
Amps resistive load at 115 Vac
Lubrication: High
grade gear grease, permanently lubricated. Self-lubricating bearings.
Mounting: ISO 5211
Conduit Entry: 2
– ¾” NPT provided
Output Torque: 1,200
inch pounds
Rotation: CW or CCW
for spring return
Weight: 70 pounds |
